Perimeter Drainage Channel

WaterGuard™ Perimeter Drainage Channel

WaterGuard™ is the piping system engineered specifically to solve basement water problems effectively without worry of clogging from soils under the floor. It has large holes in the back to accept water and a flange with special segments.

Practical Design – The patented WaterGuard™ system has a design that separates it from the soil under your floor so it will never clog. It also has a special wall flange that creates a neat space between the floor and the wall to drain any wall seepage, without allowing dirt and debris from the floor to enter. The WaterGuard™ system is applicable to all types of foundations including block, poured concrete, stone, etc. Weep holes are drilled into block walls to drain water out of the walls into the system. Water enters the WaterGuard™ system via holes on the wall side and flows in the WaterGuard™ conduit to a SuperSump™ or other drain.

waterguard_technical

The WaterGuard™ system intercepts water at the perimeter of your basement and drains it, unseen, safely away The system will keep basements clean and dry so the space can be used for storage, recreational purposes, or to finish for additional living space.

  • Relieves hydrostatic ground-water pressure, helping to create healthy dry living and storage environments
  • Effectiveness is independent of substrate condition, unlike bonded tanking systems
  • Frequently employed to solve problems where other systems have failed