Surveyors Fotofile: Death Watch Beetle (Xestobium rufovillosum) Damage
Here’s a photo from one of our surveyors from Timberwise Leicester showing the damage that can be caused by Death Watch beetles as they tunnel under the outer carcass of timbers – causing more damage than is visible on the surfaces of hardwood timbers.
The Death Watch beetle is a wood boring beetle that grows to approx 7 mm long with larvae growing anywhere up to 11mm in length. The common name refers to the repeated tapping or ticking sound produced by the adults as they bang their heads against the timbers of the property – it is believed this sound is used to attract a mate. The errie sound made by the Death Watch beetle was said to countdown the time to death!
Areas where the Death Watch Beetle is found
Death Watch beetles prefer very damp conditions especially those where there is some form of fungal decay present such as “wet rot” in the timbers. Under these conditions the beetles can develop rapidly. The Death Watch beetle has a preference for European hardwoods, such as oak, ash and chestnut; that has been “softened” with dry or wet rot. The larvae have a tendency to tunnel towards the centre of the timber resulting in extensive damage that may be considerably more than you would think form the exterior of the timber.

Damage caused by Death Watch beetles
Damage from Death Watch beetle infestation is often extreme especially in concealed bearing ends of timbers that are inserted into damp walls. In conjunction with wood rot as well the attack may hollow out the centre of large section beams making the timber structurally unsafe.
What to do if you suspect a Death Watch beetle infestation
Correct identification of the beetle infestation is needed to ensure that the correct remedial treatments can be recommended. To arrange for one of our experts to survey the beetle damage call 0800 288 8660 or complete our on-line survey request form.
1 Drake Mews Gadbrook Park, UK, CW9 7XF UK
philiplund@timberwise.co.uk • 01606 33 36 36




The impressive grade 1 listed
The holes that are commonly associated with a woodworm infestation are made by the adult woodworm beetles. The woodworm make the holes as they exit the wood . The woodworm flight season tends to be between May and September. One idea is to block the woodworm holes during the cooler winter months by painting with a simple coat of emulsion, or by applying masking tape. In the spring, you can then easily see if any woodworm beetles have emerged from the timber and therefore determine whether you have an active woodworm infestation or not. Alternativley seek the advice of a professional.



Today’s surveyor photo shows the tell tale signs of a woodworm infestation. It was taken by a Timberwise surveyor whilst surveying the loft of a property in Chester that was having a 
The larvae of the House Longhorn beetle usually mature in the spring months. The mature House Longhorn beetles eat their way out of the timber, in the process creating a hole between 6-10 mm in diameter. These holes resemble the holes left by the most common form of woodworm, 





boring insects. Even where timbers have been infected within a property some wood borers are regarded as innocuous and do not require treatment, and in some cases an infestation has simply died out.


