EnergySaver Datamatic Fans

Envirowise EnergySaver Datamatic Plus Fans

The EnergySaver Datamatic Plus fans from Envirowise are designed to automatically sense the relative humidity within the building and switch on to reduce the humidity to a pre-set level.

All fans in the EnergySaver Datamatic Plus range benefit from state of the art microprocessor controlled ceramic sensors, which guarantee low maintenance whilst providing a reliable service, as well as housing an automatic data logging facility.

Data concerning relative humidity, temperature, relative humidity set point, vapour pressure, dew point, power interrupts along with information logging every time the fan has run is stored for a total of 420 days.

The EnergySaver Datamatic Plus range are available for kitchens and bathrooms and offer high performance fans whilst maintaining low running costs.

The main benefits of the EnergySaver Datamatic Plus range are:

EnergySaving – on average costs less than £1 to operate a year
Data logging to capture on site data
Manual override facility
Silent mechanical shutters to eliminate wind rattle
Quiet and economic running
High performance ball bearing motor

EnergySaver Datamatic Plus Kitchen Fan

Our modern lifestyles make condensation in kitchens unavoidable. Added moisture in the air comes from a variety of sources – from cooking food to boiling a kettle – we are continually adding moisture to the environment. With our EnergySaver Datamatic Plus kitchen fan humidity is controlled using the latest in air quality technology.

Designed from high quality thermoplastic material the EnergySaver Datamatic Plus kitchen fan is designed to solve air quality problems within the kitchen environment. With it’s built in sensors to detect relative humidity the shutters on the front of the unit silently glide open when a rise in relative humidity is detected to effortlessly extract moisture from the living environment – closing when relative humidity returns to 5% below a chosen preset level to prevent draughts coming back into the room.

Special Features

Impedance protected 12 volt 8.4 watt DC ball bearing motor
Records in real time important environmental data over a period of 420 days
Silent integral mechanical back-draught shutter
Anticipatory control
Contamination proof sensor head with a lifetime guarantee
Integral adjustable speed control
5 year guarantee

Screen shot 2009-10-28 at 11.34.40

EnergySaver Datamatic Plus Bathroom Fan

Condensation in bathrooms is an unavoidable problem of modern living. Added moisture in the air comes from a variety of sources – from running the bath to taking a shower – we are continually adding moisture to our livingspaces. With our EnergySaver Datamatic Plus bathroom fan humidity is controlled through intelligent monitoring of relative humidity helping to alleviate your condensation problems whilst improving air quality. The dynamic humidity sensor is designed to operate when any rapid increase in the humidity is sensed. When the water vapour has been extracted and the humidity level returns to normal the dynamic controller will switch off the fan. This EnergySaving technology guarantees that the fans only operate when they need to – saving loss of heat from the property whilst reducing running costs.

Special Features

Impedance protected 12 volt 2.9 watt DC ball bearing motor
Records in real time important environmental data over a period of 420 days
Silent integral back-draught shutter
Dynamic control in range 40% – 75% relative humidity
Contamination proof sensor head with a lifetime guarantee
5 year guarantee

Screen shot 2009-10-28 at 11.37.27

Data Capture

data capture

Every EnergySaver Datamatic Plus fan comes with the facility to log important environmental data over a rolling period of 420 days. This data can then easily be down loaded for use on a PC or Laptop for further detailed analysis of the air quality issues within the room.

Data surrounding the following areas is held: