Basement Waterproofing for £1 million home designed by award winning architects
Client: Arun Projects Ltd
Products Used: Cavity Membrane
Perimeter Drain Channel
Koster NB1 waterproofing slurry
Set in the beautiful Hampshire village of Chilbolton in a quiet cul-de-sac location surrounded by countryside sits Pennard, a five bedroom detached new build home designed by Award Winning Architect, Adam Knibb. Pennard offers 3552 sq ft of open plan living space along with stunning views and an extensive lower ground level to the property.
Timberwise, as well as three other Waterproofing Designers, were called upon to tender for the waterproofing project. Following a site visit, the Timberwise waterproofing design team were able to identify the potential problems that external waterproofing systems as proposed by other designers, would have caused to the neighbouring structure.
External waterproofing would have resulted in the need for extensive excavation work to be carried out that would have been unavoidable for the basement to have been waterproofed. This would also have ultimately taken the final costs of the project over the budget in place. With this in mind, Timberwise Southampton designed the waterproofing system to comply with BS 8102 (The code of practice for protection of below ground structures against water from the ground) and Premier Guarantees strict guidelines and ultimately was awarded the project.
The Waterproofing Solution Methodology
Complying with BS.8102:2009. “Protection of below ground structures against water from the ground” and Premier Technical Manual Chapter 6 (Basements) guidelines, Timberwise proposed a combined system consisting of Type A and Type C waterproofing.
Externally Koster NB1 waterproofing slurry is applied to the brick upstand from the beam and block up to 300mm to the perimeter as indicated on the plan.
Koster NB1 Internally applied to the concrete block substrate to provide the first waterproofing barrier, and to conform to the Premier Warranty Chapter 6.1
Type C (Internal Cavity Membrane)
Type C is usually the preferred method as part of a combined system for a new build, which made it the perfect solution for the basement at Pennard.
The wall and floor system has been specifically designed for below ground installation and is a high density extruded membrane moulded in a stud formation.
The studs serve to hold the membrane away from the areas being waterproofed allowing water to move freely behind the system and to drain away. In this way, water pressure does not build up behind the substrate or the membrane and the membrane also acts as a water vapour barrier. Such a system ensures that any internal wall or floor finishes remain dry.
Timberwise supplied and fixed 8mm cavity drain membrane to the walls using quick seal plugs and then laid 20mm cavity drain floor membrane. This was then sealed to the wall membrane and the perimeter drainage channel using the over seal corner tape.
Moreover, cavity drain membrane does not impose any load onto the structure or wall, it is also quicker to install than some other waterproofing systems, and easier to repair should there be a problem with the system at some point in the future.
Overall, after facing and overcoming extreme weather and heavy snowfall and the challenges that come with excavating in close proximity with a neighbouring property, Timberwise were able to create a system that is flexible, maintainable and importantly carries a 10-year guarantee.
Commercial Waterproofing Design from the experts
Having designed and installed many different waterproofing systems across a broad spectrum of customers you can have confidence that Timberwise is your go-to team of waterproofing specialists to help with your project.
If you have any questions about how Timberwise can help you with your project, please feel free to chat directly with one of our Waterproofing Design Specialists who would be delighted to help you further.